Talk to us,Get a Solution in 20 minutes
Please let us know any requirements and specific demands,then we work out the solution soonest and send back it for free.
Cnc Z-axis Wired Tool Setter Large Strok Cost-Effective
Cost-effective CNC Z-axis wired tool setter with IP68 sealing, 11mm large stroke, and ≤0.5μm precision. Photoelectric trigger ensures high accuracy and long life. Automatically measures tool length, diameter, and deflection to reduce errors and scrap—optimized dimensions and performance for better value than DTS200.
Main Feature:
IP 68 protection level
Precision <0.5uM.
Photoelectric sensor trigger, higher accuracy and longer life
Advantage:
Automatically measures tool length, tool diameter, and tool deflection. The high-precision photoelectric trigger sensor can operate in various complex environments,improving tool detection speed and accuracy, reducing errors, minimizing scrap, and increasing productivity.
Product Parameters:
| Item NO. | DTS200C | |
| Diameter of touch pad | φ20 | |
| Trigger direction | +Z | |
| Pre-stroke | 0.7mm | |
| Output | A:NO | |
| Stroke | 8.5mm | |
| Trigger protection travel | 5.5mm | |
| Repeatablitity precision(2σ） | <1um（speed 50mm/min） | |
| Trigger life | >10 million | |
| Signal transmission mode | Cable 5m,oil resistance,6cores,φ4.8 | |
| Sealing | IP68 | |
| Triggerforce | 2.2N(Installation Status: Vertical) | |
| Touch pad material | Tungsten carbide | |
| Surface treatment | Grinding 4S | |
| Contact nominal value | DC24V 20mA(MAX) Recommended value10mA)Resistive Load | |
| Protective tube | 1.5m,minimum radius R7 | |
| LED light | Norma: off; active: on | |
