Talk to us,Get a Solution in 20 minutes
Please let us know any requirements and specific demands,then we work out the solution soonest and send back it for free.
Cnc Z-axis Wired Tool Setter Large Strok One-Key Zeroing
CNC Z-axis wired tool setter with IP68 sealing, 11mm large stroke, and ≤0.5μm precision. Photoelectric sensor trigger delivers higher accuracy and long service life, enabling fast automatic tool length, diameter, and deflection measurement to cut errors and scrap.
Main Feature:
IP 68 protection level
Large Strok design of 11mm
Precision <0.5uM.
Photoelectric sensor trigger, higher accuracy and longer life
Advantage:
Automatically measures tool length, tool diameter, andtool deflection. The high-precision photoelectric triggersensor can operate in various complex environments,improving tool detection speed and accuracy, reducingerrors, minimizing scrap, and increasing productivity.
Product Parameters:
| Item NO. | DTS200 | |
| Diameter of touch pad | φ20 | |
| Trigger direction | +Z | |
| Pre-stroke | 0.7mm | |
| Output | A:NO | |
| Stroke | 11mm | |
| Trigger protection travel | 5.5mm | |
| Repeatablitity precision(2σ） | <1um（speed 50mm/min） | |
| Trigger life | >10 million | |
| Signal transmission mode | Cable 5m,oil resistance,6cores,φ4.8 | |
| Sealing | IP68 | |
| Triggerforce | 2.2N(Installation Status: Vertical) | |
| Touch pad material | Tungsten carbide | |
| Surface treatment | Grinding 4S | |
| Contact nominal value | DC24V 20mA(MAX) Recommended value10mA)Resistive Load | |
| Protective tube | 1.5m,minimum radius R7 | |
| LED light | Norma: off; active: on | |
